What to do if my Daewoo DWD-FT1083 Washer is leaking water?
If your Daewoo Washer is leaking water, check the following: * Inlet or drain hoses might be loose at the tap or washer. Check and tighten the hose connections. * House drain pipes could be clogged. Unclog the drain pipe, and contact a plumber if necessary.
Why is my Daewoo DWD-FT1083 Washer not spinning?
If your Daewoo Washer won't spin, ensure that the door is firmly shut. Close the door and press the Start/Hold button. After pressing the Start/Hold button, it may take a few moments before the cloth begins to spin.
What to do if water enters Daewoo DWD-FT1083 Washer slowly?
If water is entering your Daewoo Washer slowly, consider the following: * The water supply in your area may not be adequate. Check another tap in the inlet house. * The water supply tap may not be completely open. Fully open the tap. * The water inlet hose may be kinked. Straighten the hose. * The filter of the water inlet may be clogged. Check the filter of the water inlet.
Why is my Daewoo DWD-FT1083 Washer leaking water?
If your Daewoo Washer is leaking water, check and tighten the inlet and drain hose connections at both the tap and the washer. Also, inspect your house drain pipes for clogs and unclog them. If necessary, contact a plumber.
What causes the 'IE WATER IN ERROR' on a Daewoo DWD-FT1083 Washer?
If you see the 'IE WATER IN ERROR' message on your Daewoo Washer, first, ensure that the water tap is fully open. If it is, check the filter of the valve inlet for any clogs and clean it. If the issue persists, the valve inlet, water level sensor, or drain motor may be faulty and need to be replaced. It's also possible the PCB ASS’Y isn't checking the water level correctly, requiring replacement.
What to do if my Daewoo Washer does not start?
If your Daewoo Washer isn't starting, ensure the power cord is securely plugged into the wall outlet. Also, check your house fuse or circuit breaker; reset it if necessary, but do not increase the fuse capacity. If the problem persists, consult a qualified electrician to correct a potential circuit overload. Finally, make sure the water supply tap is turned on.
What does 'OE DRAIN ERROR' mean on my Daewoo DWD-FT1083?
If your Daewoo Washer displays the 'OE DRAIN ERROR', the drain hose may be kinked or clogged; clean and straighten it. If the error continues, the drain motor or water level sensor could be faulty and require replacement. It's also possible the valve inlet is activating during draining, or the PCB ASS’Y isn't correctly monitoring the water level, both requiring component replacement.
Why is my Daewoo DWD-FT1083 making a rattling noise?
If your Daewoo Washer is making rattling or clanking noises, there might be foreign objects, such as coins or safety pins, in the drum or pump. Stop the washer and check both the drum and the filter for any such items.
What does 'E2 OVERFLO ERROR' mean on a Daewoo DWD-FT1083?
If your Daewoo Washer displays the error 'E2 OVERFLO ERROR', it indicates that water is continuously being supplied, likely due to a faulty valve inlet that needs replacement. Alternatively, the valve inlet might be working correctly, but the water level sensor is malfunctioning and needs to be replaced. In some cases, the drain motor may not be working, also requiring replacement.
What does 'LE DOOR OP ERROR' mean on my Daewoo DWD-FT1083?
If your Daewoo Washer displays 'LE DOOR OP ERROR', it means the Start/Hold button was pressed while the door was open; ensure the door is closed. If the error persists, the door lock switch may be defective and need replacement. It's also possible that the PCB ASS’Y is not correctly checking the door lock, requiring its replacement.
Explains the purpose of transit bolts and how to remove them before operation.
Specifies requirements for washer placement, level floor, and power outlet.
Details how to connect the water inlet hose for ordinary and screw-shaped taps.
Details correct placement and securing methods for the drain hose.
Details the step-by-step progress times for various wash programs like Cotton, Synthetic, and Wool.
Lists error codes (IE, OE, UE, etc.) with their causes and solutions.
General| Washing Capacity | 8 kg |
|---|---|
| Spin Speed | 1000 RPM |
| Energy Rating | A+++ |
| Noise Level (Washing) | 58 dB |
| Dimensions (H x W x D) | 85 x 60 x 55 cm |
| Weight | 65 kg |
| Color | White |
| Type | Front Load |
| Programs | Cotton, Quick Wash, Rinse, Wool |
To Next Page
