EasyManua.ls Logo

Daewoo DWD-FT1083 - User Manual

Daewoo DWD-FT1083
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Service Manual
Washing Machine
Model: DWD-FT1081/FT1082/FT1083
DWD-FT1281/FT1282/FT1283
DAEWOO ELECTRONICS CORP.
S/M No. :
http : //svc.dwe.co.kr May. 2011
āœ” Caution
: In this Manual, some parts can be changed for improving,
their performance without notice in the parts list. So, if you
need the latest parts information, please refer to PPL(Parts
Price List) in Service Information Center (http://svc.dwe.co.kr).

Questions and Answers

  • T
    taylorjoseSep 4, 2025
    What does 'UE UNBALAN ERROR' mean on a Daewoo Washer?
    • S
      Sherry DunnSep 4, 2025
      If your Daewoo Washer displays 'UE UNBALAN ERROR', it means the laundry is concentrated to one side of the drum during the spin cycle. Stop the washer and rearrange the laundry to balance the load.
  • P
    Phillip CalderonSep 4, 2025
    Why is the wash cycle time delayed on my Daewoo Washer?
    • J
      Joseph LamSep 4, 2025
      If your Daewoo Washer is taking longer than usual to complete a wash cycle, the washing time may vary depending on the amount of laundry, the water temperature, and other conditions. The wash time will increase if an imbalance is detected.
  • T
    Tony JacksonSep 5, 2025
    Why is my Daewoo DWD-FT1083 making a thumping sound?
    • A
      andrew02Sep 5, 2025
      If your Daewoo Washer is making a thumping sound, it's likely due to a heavy wash load, which is usually normal. However, if the sound continues, the washer may be out of balance. Stop the washer and redistribute the wash load.
  • D
    Dr. Victoria Fuller DVMSep 6, 2025
    Why is water not entering my Daewoo Washer, or entering slowly?
    • J
      John OrtizSep 6, 2025
      If your Daewoo Washer is not filling with water or is filling slowly, the water supply in your area may be inadequate; check another tap in the house. Ensure the water supply tap is fully open and that the water inlet hose is not kinked; straighten it if it is. Also, check the filter of the water inlet for clogs.
  • R
    robinsonpeterSep 6, 2025
    What causes oversudsing in my Daewoo DWD-FT1083?
    • S
      Stacy GreenSep 6, 2025
      Excessive foaming in your Daewoo Washer can be caused by using too much detergent or an unsuitable detergent. This can lead to water leaks.
  • J
    joconwaySep 7, 2025
    What does 'E4 LEAKAG ERROR' mean on my Daewoo DWD-FT1083 Washer?
    • M
      Michael GonzalezSep 7, 2025
      If your Daewoo Washer displays 'E4 LEAKAG ERROR', it indicates water is leaking from the tub or the drain hose. Check the tub and drain hose for leaks, and then replace the leaking component.

Summary

SPECIFICATIONS

INSTALLATION

Transit Bolts and Removal

Explains the purpose of transit bolts and how to remove them before operation.

Installation Place Requirements

Specifies requirements for washer placement, level floor, and power outlet.

Inlet Hose Connection

Details how to connect the water inlet hose for ordinary and screw-shaped taps.

Drain Hose Installation

Details correct placement and securing methods for the drain hose.

MAINTENANCE

FUNCTIONS OF THE CONTROL PANEL

FUNCTIONS OF THE CONTROLLER

Program Sequence Charts

Details the step-by-step progress times for various wash programs like Cotton, Synthetic, and Wool.

TROUBLESHOOTING GUIDE

Error Code Diagnosis

Lists error codes (IE, OE, UE, etc.) with their causes and solutions.

WIRING DIAGRAM

Daewoo DWD-FT1083 Specifications

General IconGeneral
Washing Capacity8 kg
Spin Speed1000 RPM
Energy RatingA+++
Noise Level (Washing)58 dB
Dimensions (H x W x D)85 x 60 x 55 cm
Weight65 kg
ColorWhite
TypeFront Load
ProgramsCotton, Quick Wash, Rinse, Wool

Related product manuals