16
TROUBLE SHOOTING
CONCERNING TIME-OUT IN BRAKE
Yes
Yes
Yes
No
Adjust the brake moment.
Adjust the resetting spring.
Adjust the rubber bushing.
Check if the pawl can leave the
ratchet for 2mm up during spinning.
If the brake arm position can not be
adjusted
Replace the retarder.
If the brake moment of the retarder
is smaller than 4N.m
If the resetting spring of the retarder
is too soft
If the gap between the connecting arm
block and the retarder brake arm
is smaller than 0.8mm
No
No
To Next Page
Loading...
