4. FEATURE AND TECHNICAL EXPLANATION
7
FEATURE
WASH DRAIN SPIN FILL RINSE 1
S
PIN
F
ILL
DRAIN
RINSE 2 DRAIN
MOTOR C.W
SINGAL C.C.W
TIME(SEC.) 0.4 0.6 0.4 0.6 0.4 0.6
30 SEC. (About 30 Times)
FEATURE OF THE WASHING MACHINE
The first applying Radical Technology in the world....go beyond washing, sterilize your clothes and deodorize a
bad smell.
Quiet washing through the innovational low-noise design.
The adoption of the water currents to adjust the unbalanced load.
WATER CURRENT TO ADJUST THE UNBALANCED LOAD
It is a function to prevent eccentricity of the clothes after wash by rotating pulsator C.W and C.C.W for 30
seconds.(except for the course “soft” and “tub self-clean”.)
EFFECT
It reduces vibration and noise effectively while spinning.
WATER FLOW
FUNCTION FOR SOAK WASH
DISPLAY THE RESIDUAL TIME
When the SOAK WASH is selected, the total wash time increases because 20 minutes(“normal” , “self-clean”
and “water saving” course ) or 30 minutes(”heavy” and “fine purifition” course) for soak process are added to
PROGRESS
AUTOMATIC WATER SUPPLY SYSTEM FOR WASH
The water level would be lowered because the washings absorbs water at the beginning of washing. Therefore, after
some secs, the operation is interrupted to check the water level, and then the water is supplied again until the select-
ed water level is reached.
" " mark indicates the operation of the water currents to adjust the unbalanced load.
NOTES
Transparency display window.
Self-cleaning tub.
Air-dry function.
......
...
FILL WASH STOP WASH STOP WASH STOP WASH STOP
SOAK PROCESS
MAIN PROCESS
30 Minutes
2' 3' 1'
4'
1' 9' 1' 9'
Fuzzy function.
the time of main process.
To Next Page
Loading...
