2. STRUCTURE OF THE WASHING MACHINE
3
STRUCTURE
Accessories
The parts and features of your washer are illustrated on this page.
Become familiar with all parts and features before using your washer.
NOTE
©The drawing in this book may vary from your washer model. They are designed to show the different features
of all models covered by this book, Your model may not include all features.
the end connecting to
the water inlet hose jointer
the end connecting to
the washing machine
jointer connecting the
water inlet hose and
the water faucet
water inlet hose
(2pcs)
Water inlet
hose jointer
(2pcs)
(The two water inlet
hose components
are the same and
there's no different
on cool/warm water
during using)
Under cover(1pcs)
tapping screws(2pcs)
Inlet valve cap(including sealing plate)(1suit)
TOP LID
HOT WATER TAP
After using the washer, close the water tap.
In case of the single valve model,
there is no hot water valve.
COLD WATER TAP
After using the washer,
close the water tap
LINT FILTER
CONTROL PANEL
ADJUSTABLE LEG
POWER SWITCH
PULSATOR
DETERGENT CASE
POWER CORD
PIPE
COLD VALVE
HOT VALVE