Daewoo DWF-270G - Comprehensive Troubleshooting Table

17
TROUBLE-SHOOTING TABLE
In pre-wash , the washer stops running,
the numeral tube shows“E5”
The safety switch acts. The
spinning can not work (after
amending twice automatically)
The numeral tube shows“E3”
Not supplying water
（
The numeral tube shows“E4”
or the speed
is too slow the suitable water
level doesn't research about 16
minutes.
The draining does not work, or the speed
of draining is too slow ,The numeral tube
shows“E1”
The machine stops running In spinning.
The numeral tube shows“E2”
Is the power off?
Does the power cord loose?
Does the water level sensor contact badly?
Please contact with after-service center
The numeral tube shows“E6”
The top lid is not closed.
The top lid is not closed.
Close the top lid.
Close the top lid.
Is the drain hose put down?
Are the laundries put slantingly?
Re-order the laundries. Close the top lid.
The water faucet is not open or supplying
water is stoped.
The water inlet valve is blocked.
Clean the water inlet valve .
Push the "Start/Pause" button.
Open the water faucet.
Push the "Start/Pause" button.
Is the drain hose blocked by foreign
material?
Is the machine slanting?
Is some metal inside the washer?
Are the laundries slanting in spinning?
Is the jointer screw of the water inlet
hose loose or twisted awry?
Insert the power plug tightly.
Use it when the power is on.
Level the machine properly.
Re-order the laundries.
Fasten the fastener or zip up the zip.
Fasten the jointer screw properly.
The water faucet leaks.
The machine does not act.
(Indicators are off.)
There's abnormal sound inside
the machine.
Is the machine slanting?
Level the machine in right position.
Open and close the top lid once.
Phenomenan The reason How to settle
Put down the drain hose.
Open and close the top lid once.
The washer keeps filling water or
drains automatically.the numeral
tube shows“E7”
Does the water level sensor, inlet valve or
computer sequencer bad?
Please contact with after-service center
Does the temperature sensor bad?
Please contact with after-service center
The numeral tube shows“E8”
TROUBLE SHOOTING