Daewoo GC30E-3 - Page 151

G424 Service Manual Base Engine Service Procedure150
6EN0580
6EN0494
6EN0579
6LU0015
D Counterbalance shaft oil seal installation
(1) Using a suitable socket wrench, install the
counterbalance shaft oil into the front case.
E Oil pump oil seal installation
(1) Using a suitable socket wrench, install the oil pump oil
seal into the front case.
F Crank shaft front oil seal installation
(1) Using the special tool, install the crankshaft front oil seal
into the front case.
G Oil pump driven gear/oil pump drive gear
installation
(1) Apply engine oil amply to the gears and line up the
alignment marks.
Socket wrench
Front case
Oil seal
Socket
MD998375
Front case
Alignment
mark
Oil seal
Front case
Oil seal