3-14 Operation 022-00028AE Operation and Maintenance Manual
2. Put transmission lever in "NEUTRAL."
3. Set transmission neutral lock is in the "N"
(NEUTRAL LOCK) position.
4. Set parking brake switch to the "I"
(APPLIED) position. This will ensure that
the parking brake is "APPLIED."
5. Set bucket on ground.
6. Select pilot cutoff switch to "O" (LOCKED)
position. This will lock pilot control valve
lever (joystick).
7. Allow engine to idle for 1 - 2 minutes to
cool down. Stopping a turbocharged
engine without a cool down period can
seriously damage turbocharger.
CAUTION!
"LOCK" transmission lever. When
ever machine is parked, "LOCK"
transmission lever in "NEUTRAL" to
prevent accidental machine
movement.
Figure 31
Figure 32
HA0O2019
P
O
I
Figure 33
HBOI111L
O
I
Figure 34
To Next Page
Loading...
