4-18 Inspection, Maintenance and Adjustment 022-00028AE Operation and Maintenance Manual
50 HOUR / WEEKLY SERVICE
PERFORM ALL 10 HOUR / DAILY SERVICE CHECKS
GREASE FRONT ATTACHMENT PINS
MEGA 200-V
1. Following fittings are greased daily, or every 10 hours, for first 100 hours of operation to comply with
new machine break-in requirements. After that, greasing should be done every 50 hours. If bucket is
being used in water, grease fittings immediately after machine is removed from water.
D
C
B
A
E
F
APO0080L
Figure 26
To Next Page
Loading...
