3-2 Operation 022-00028AE Operation and Maintenance Manual
ENGINE START AND STOP
ENGINE START
1. Set parking brake switch to "I" (APPLIED)
position. This will ensure that the parking
brake is "APPLIED."
2. Move all control levers to "NEUTRAL"
position.
3. Make sure transmission neutral lock is in
the "N" (NEUTRAL LOCK) position.
IMPORTANT
If transmission lever is not in
"NEUTRAL" position, engine will not
start.
HA0O2019
P
O
I
Figure 1
Figure 2
Figure 3
To Next Page
Loading...
