022-00028AE Operation and Maintenance Manual Operating Controls 2-1
2
OPERATING CONTROLS
"Operating Controls" section presented here consists of the following groups:
1. “Component Locations” on page 2-2
2. “Control Identification” on page 2-8
3. “Steering Console and Pedals” on page 2-9
4. “Transmission Display” on page 2-16
5. “Front Instrument Panel” on page 2-18
6. “Right Side Switch Panel” on page 2-27
7. “Various Cabin Locations” on page 2-38
8. “Heater and Air Conditioner Operation” on page 2-42
9. “Stereo” on page 2-47
10. “Seat Adjustment” on page 2-51
11. “Seat Belt” on page 2-53
12. “Door Side Latch” on page 2-54
13. “Fuse Box/Relay” on page 2-55
14. “Window Glass Breaking Tool” on page 2-58
Each group is explained with a point location drawing or photo and a brief description of each control,
switch, gauge or valve.
Indicator lights work in addition to gauges on instrument panel. Operators should monitor machine
pressure on instrument panel along with indicator lights. These lights will only give operators an indication
that there is a problem.
WARNING!
Warning lights. When any one or more of the warning lights on the control console turn "ON,"
immediately discontinue operation and shut down unit. Investigate and correct problem before
proceeding with operation.
To Next Page
Loading...
