Chapter 1 General Descriptions
BECS-A88/C88 computerized embroidery machine owner’s manual 3
cannot disassemble circuit boards.
Notice
If machine is inactive for a while, users must power on the machine
regularly (once in 2 or 3 days, more than an hour for each time).
Notice
If machine is inactive for a long time, users should have the machine
checked before power on.
Rejection
Notice
Rejection should obey the rules and regulations set by national industrial
electronic standards.
1-2
The difference between A88 and C88
The difference between A88 and C88 is that C88 have the function of Coiling,
Taping and Zigzag Embroidery and C88 have the validation of factory ID, but
A88 have not. Other operations or functions is same.
1-3
Main Features
1. User Friendly Touch Screen
Adoption of touch screen technology offers delightful operation and easy learning.
The beautiful screen display turns everyday work into joyful experiences.
2. Shutdown of LCD Display
Following measures were taken in order to extend the LCD life: LCD will turn off
automatically in case of no operation in 10 minutes (the time can be changed in
parameter setting). A touch of the screen or the task-shifting key will reboot the
LCD.
3. Super-Large Memory Capacity
The memory capacity reaches 16 million stitches, in which 400 designs can be
restored. Its super-large memory capacity can meet demands of different
To Next Page
Loading...
Need help?
General
