Index
BECS-A88/C88 computerized embroidery machine owner’s manual I
Index
Chapter 1 General Descriptions................................................................................1
1-1 Warnings and Cautions................................................................................1
1-2 The difference between A88 and C88..........................................................3
1-3 Main Features...............................................................................................3
1-4 Technical Specifications ..............................................................................8
Chapter 2 Operation Instruction.............................................................................10
2-1 Configuration and Direction of the Control Panel.....................................10
2-2 Instruction of Control Panel.......................................................................11
2-3 Instruction of the Main Screen...................................................................12
2-4 Notes on Menu State..................................................................................19
2-5 Flow Chart of Embroidery.........................................................................20
2-6 Normal Embroidery, Returning and Patching ...........................................30
2-7 Operation Bar and Turn Shaft Button........................................................31
2-8 Patching Switch..........................................................................................32
2-9 System's Working Statuses ........................................................................32
Chapter 3 Disk Management..................................................................................34
3-1 Disk Choosing............................................................................................34
3-2 Select One or Several Designs...................................................................37
3-3 Design Preview ..........................................................................................39
3-4 Design input ...............................................................................................40
3-5 Design Output ............................................................................................42
To Next Page
Need help?
General
