Chapter 12 Directions on Coiling, Taping and Zigzag Embroidery
162 BECS-A88/C88 computerized embroidery machine owner’s manual
setting of manual shift still be in effect when system is in automatic shift
state.
During the embroidery process, it is common to shift between normal head and
special head. For instance, from special head to normal head, machine will
automatically stop at the finishing point; meanwhile, system will give the
following dialogue window. After tape operations are completed, users can pull
bar to close the window and shift the machine back to normal head to proceed
normal embroidering.
From lock-stitch to special embroidering, after automatically shift to “1” (special
head), machine will stop automatically, after the operation on the tape is
completed, pull bar to proceed.
12.4.2
M Axis Operation of Taping Embroidery
This function is only for machines with taping embroidery function and includes
“M axis to be ready”, “M axis to cycle” and “M axis to turn”. In the main screen,
To Next Page
Loading...
Need help?
General
