Appendix Ⅰ Parameter Setting List
170 BECS-A88/C88 computerized embroidery machine owner’s manual
Appendix Ⅰ Parameter Setting List
**“Sti.” For stitches; “Emb.” For embroidery; “T. B.” for thread break; “N”
for the needle number of machine heads
Number Name Recom
mended
Val ue
Range of Setting Note
Frequently-Used Parameters
A01 X&Y Scales 100/100 50%~200% Scales of the design in
X and Y directions
A02 Rotate 0 0~89 Rotating angle of the
design
A03 Direction P
A04 Prior Mode Rotate Rotate, scale
A05 Rep. Mode Normal Normal, part Not used
A06 Rep. Prior X Prior X prior, Y prior
A07 X&Y Reps 1/1 1~99
A08 X&Y Interval 0.0/0.0 -999.9~+999.9
Emb. Parameters
B01 Auto Origin Yes No, Yes
B02 To Do Cyclic
Emb.
No No, Yes Whether to
automatically repeat
embroidering the
design It often
accompanies repetition
or special punched
design.
B03 Over frame by
Step
No No, Yes
B04 Display
Sti-Num or Not
Yes No, Yes
B05 T. B. Detect Yes No, Yes Thread break detect
B06 Stop after T. B.
Detect
Yes No, Yes
B07 Press key after
T. B.
No No, Yes Press key (pull bar)
after T. B.
B08 T. B. Back Sti. 0 0~7 It is unavailable to
some machine types.
B09 Patch Count 1 1~10 How many stitches to
patch before the thread
To Next Page
Loading...
