Chapter 12 Directions on Coiling, Taping and Zigzag Embroidery
152 BECS-A88/C88 computerized embroidery machine owner’s manual
Chapter 12
Directions on Coiling, Taping and Zigzag Embroidery
Note: A88 system has not this function and operations.
12-1
Function Introductions
1. Coiling function: This is a method to wind coiling thread(s) at an equal
interval around a core thread in a form of coil. Left Coiling (clockwise) and Right
Coiling (counterclockwise) are both available in coiling function, which could be
opted in computer parameters.
2. Taping function: Tape can be used as embroidery material. It includes
taping 1and taping 2 (blind embroidery)
3. Zigzag function: Zigzag sewing lever swings to the right or left per stitch
in regard to the direction of original stitches. The upper thread forms Zigzag on
the embroidered material. There are six special stitches: Z1, Z2, Z3, Z4, Z5 and Z6.
Their stitches are as follows.
Z1 Z2 Z3 Z4 Z5 Z6
For convenience, Coiling, Taping and Zigzag-sewing are all called special
embroidery in the following.
4. Standard embroidery head and special embroidery head can be switched
automatically or manually.
5. Coiling, Taping and Zigzag functions can be switched at will.
6. The nipple of Special embroidery can be raised and lowered
To Next Page
Loading...
Need help?
General
