Chapter 6 Memory Design Management
68 BECS-A88/C88 computerized embroidery machine owner’s manual
Please read the following paragraphs for detailed explanation. Click to
return to the memory design management screen.
6-2
Selecting a Design for Embroidery
Select a new design (Ensure that the system is in preparation status )
Click in the main screen to enter the memory design management
screen.
Select the design in the memory design image area of the memory design
management screen.
Click to set the selected design as the embroidery design. If
the operation is completed, the system will close the memory design screen to
return to the main screen.
6-3
Memory Design Preview
The selected design can be previewed in the memory design preview screen
according to the designated way.
To Next Page
Loading...
Need help?
General
