Chapter 11 Sequin Embroidery
146 BECS-A88/C88 computerized embroidery machine owner’s manual
Chapter 11
Sequin Embroidery
11-1
Brief Introduction on Sequin Embroidery
Sequin embroidery is composed by several sequins and threads. We choose those
hard materials with smooth surfaces as the sequins. Embroidery works will be
shining with these sequins attached. Sequin embroidery has its own way of
designing. After design selection, changing and editing, users can pull bar to start
embroidering. Sequin embroidery usually goes with normal or special
embroideries to create combined new designs.
A. Scope:
This system applies to sequin embroidering control system which combines
normal embroidering mechanism and sequin sending mechanism.
B. Features and Functions:
1. Two sending modes: Wheel and Fork;
Wheel: the core part is a wheel-like device in the whole mechanism. Its operating
principle is to wheel continuous towards one direction to send sequins into
position.
Fork: the core part is a planar linkage. Its operating principle is to move
back-and-forth to send the sequins into position.
2. Sequin mending and Independent actions of the two sequin sending mechanism
3. Delivering a sequin by operating either manual sequin sending button or the
control panel
To Next Page
Loading...
Need help?
General
