Chapter 12 Directions on Coiling, Taping and Zigzag Embroidery
BECS-A88/C88 computerized embroidery machine owner’s manual 153
automatically or manually. (Only for the machines installed with relevant
apparatus)
7. The highest speeds of Standard embroidery head and special embroidery
head can be set up respectively.
8. Auto saving of the stop-embroidery point of the M axis：The embroidery
work can continue from the stop-embroidery point when the power recovers.
9. The trimming function of the special embroidery head (no
trimming\trimming of the bottom thread\trimming of both the upper and bottom
threads)
10. The nipple of Special embroidery can be raised and lowered automatically
before manual frame shifting or embroidering.
11. Zigzag sewing lever can be tested manually.
12-2
Main Technical Details
1. The sequence of needle positions on Standard embroidery head and
special embroidery head: This control system default that the first one is special
embroidery needle position and Standard embroidery’s are from second to end.
2. Speed range of Special Embroidery: 300—600rpm, minimum of stepping
precision is 10r.
3. Angle of M-axis rotated manually: 18°/step.
12-3
Parameters and parameter setting
Press the parameter-setting key
in the main screen to set relative
To Next Page
Loading...
