Chapter 9 Assistant Operation Functions
114 BECS-A88/C88 computerized embroidery machine owner’s manual
Click
to confirm or click to cancel the operation.
The system will calculate the design’s peripheral data and enter the
embroidery confirmation status and the main screen.
The main screen will show
. The user pulls bar to embroider the design range.
After finishing it, the system will automatically come back to embroidery
preparation status.
9-7
Embroider one Cross
The system can embroider a cross at the current position, whose size can be
adjusted according to the input.
Click in the main screen to enter the assistant operation screen.
Click “Embroider one Cross”.
The system will enter the setting screen for embroidering one cross.
To Next Page
Loading...
Need help?
General
