Chapter 3 Disk Management
42 BECS-A88/C88 computerized embroidery machine owner’s manual
first design.
To modify the design number and name, click the object item in the left window
and modify it in the right window. After the modification click the modification
confirmation key
, and the results will be save.
Click the confirmation key
The system inputs the design data from the disk to the memory and displays
the operation results in the information display area.
3-5
Design Output
The user can output the design data in the system memory to the current disk.
Click the design output key
Select the design in the memory intended for output
To Next Page
Loading...
