Chapter 7 Memory Design Edit
BECS-A88/C88 computerized embroidery machine owner’s manual 93
Move backward 1/10/100/1000 needles.
Move forward 1/10/100/1000 needles.
Move to the next change color code. Move to the previous change
color code.
Move to the next jump stitch. Move to the previous jump stitch..
Move to the last stitch. Move to the first stitch.
Move to the previous or next appointed stitch code. Click the key in
centre, can choose the type of stitch that need checked.
7.2.4
Convert Needle Code
After orient some one needle, click
key and can convert the type of that
needle.
Include X/Y position needle for move, such as stain stitch、jump stitch、send
sequin etc., the needle code type can convert mutually.
Don't include X/Y position needle for move, such as switch of sequin﹑stop
code、change color code etc., the needle code type can convert mutually.
7.2.5
Insert Needle
Click
key can insert a new needle code after current needle.
If the current needle is the last one needle of the pattern, so the insert position of
new needle is the excursion of current needle with same direction and same
distance.
If the current needle in the middle of pattern, so the new needle insert at the
middle position of current needle and next needle.
To Next Page
Loading...
