DAHAO A88 User Manual

Chapter 9 Assistant Operation Functions
BECS-A88/C88 computerized embroidery machine owner’s manual 111
9-3
“Move Frame to Let Design Be Central”
This function is to move frame to position the design at the center of frame
software protection, so as to embroider the design at the center of the frame. (See
“Setting the Frame’s Software Protection”, Chapter Ten)
Click in the main screen to enter the assistant operation screen.
Click “Move frame to let design be central”.
The system asks the user to confirm.

DAHAO A88 Specifications

General

Brand	DAHAO
Model	A88
Category	Monitor
Language	English