DAHAO A88 - Notes on Menu State

Chapter 2 Operation Instruction
BECS-A88/C88 computerized embroidery machine owner’s manual 19
No. Display Name Description Reference
Offset Point
Prompt
The machine is currently set with offset
point. When entering the embroidery
confirmation status
(before
starting embroidery), click
to enter
the assistant operation management
screen, in which you can set offset point.
Help for the
Main Screen
It’s the function definitions of the keys
on the main screen.
Network
Connection
Failure
This icon is black. Click
to set
network concerned parameters in
“Machine Apply” screen
Network
Connection
Success
This icon is blue.
Current Needle
Position
The number represents the current actual
needle position.
Current
Color-changing
Times
The initial value is 1, which is added one
with every time of successful
color-changing.
Color-changing
Order
The order of the numbers represents the
needle-changing sequence. And the
three-dimensional icon represents the
current icon.
Design viewing
Area
This area displays the embroidery
designs.
2-4
Notes on Menu State
If one menu is labeled
, it indicates that this menu can not be accessed and
modified. While if one menu is labeled
, it indicates that this menu can not be
accessed and modified. If there is a “Lock” on the right side of the window, then