Chapter 10 Other Functions
144 BECS-A88/C88 computerized embroidery machine owner’s manual
During the process of adjustment, there will be many of small cross with different
positions in the screen, the customer should click the centre of these cross one by
one in order, the system will obtain these positions data to be the basis of
adjustment. Click
key withdraws the operation.
10-13
Touch Screen Adjustment
After using for a period of time, the touch screen may not be as precise as it used
to be, which can be solved by adjusting the screen. During the process, the click
should be right in the center of the cross. In order to avoid improper operation, this
action may only be available to those administrators.
Click the “other function” key to enter into “other function” screen.
Click the touch screen adjust key.
Type in administrator password or factory password
Click the centre of the cross in adjustment screen one by one.
To Next Page
Loading...