DAHAO A88 - 10-3 Setting Frame Protection when Power Off (Setting the Machine’s Zero Point)

Chapter 9 Assistant Operation Functions
BECS-A88/C88 computerized embroidery machine owner’s manual 121
9-12
Clearing X and Y Displacements
This is to clear the X and Y displacements.
Click in the main screen to enter the assistant operation screen.
Click “Clear X-Y disp”.
The system will set the X and Y values to 0.
The user can check the values in the main screen.
9-13
Clear Overall Stitches
Clear the current embroidered stitches.
Click in the main screen to enter the assistant operation screen.
Click “Clear Overall Stitches”.