Chapter 11 Sequin Embroidery
150 BECS-A88/C88 computerized embroidery machine owner’s manual
b) When the sequin control switch is in the middle, blue light is on and
normal embroidery is undergoing. Operation is acceptable.
c) When the sequin control switch is down, blue light blinks and the valve is
down. Manual sequin sending is available. Sequin sending order by the
control panel is acceptable, while valve operation is not available.
Thread break switch is embroidery switch. When thread break switch is at the
down side, neither normal embroidery nor sequin embroidery is available.
Thread break warning lamp is mounted on the sequin sending device, which
offers the operator with easy view.
Note: when the manual valve control switch is in the middle, blue lamp is on,
which indicates a perfect condition of sequin embroidering.
Location of the switch board
To Next Page
Loading...
Need help?
General
