Chapter 2 Operation Instruction
26 BECS-A88/C88 computerized embroidery machine owner’s manual
Manual Operation
Manual Trimming
When the machine stops, click
in the main screen. In the followed prompt
click
to trim, or click to trim the bottom
thread. Click
to exit trimming operation.
Manual Frame-Moving
When the machine stops, press the keys （“
”、“ ”、“ ”、“ ”） to move
the frame in the corresponding direction. Press the next two keys at the same time
to move the frame in the direction of the angle bisector. “
”is the speed key for
manual frame-moving. Press “
”to switch between (high speed) and
(low speed).
Clearing the Frame Coordinates
When the machine stops, click
and then the function option
to clear the XY displacements displayed in
To Next Page
Loading...
