Chapter 1 General Descriptions
BECS-A88/C88 computerized embroidery machine owner’s manual 1
Chapter 1
General Descriptions
Thanks for using the Computerized Embroidery Control System of DAHAO
Company. It is appreciated that you do read this manual carefully in order to
operate the machine correctly and effectively. Besides, you should keep this
manual for future use.
1-1
Warnings and Cautions
Notice
Danger
During the operation, do not try to open the machine box. The high
voltage contained in some parts can be deadliness. Rotating parts may
cause serious injury.
Forbidding
Don't expose the machine to humidity gas, poisonous gas, water, and
dust.
Forbidding
Don’t restore or operate in vibration, which may cause trouble to the
machine.
Notice
Please abide all the warnings and safety requirements to save life.
Notice
LCD belongs to fragile goods. Do not use hard materials to click on the
screen.
Notice
Before plugging in, please make sure if the lamp of floppy disk driver is
on, don't move out the floppy disk.
Notice
We will add appendix if necessary, if there is any difference between the
manual and appendix, subject to the appendix.
In Transportation
Notice
Don't hold the cable when moving.
Notice
Please abide all the warnings and safety requirements to save life.
Force
Overloading may cause serious loss. Please load according to the
instruction on the box.
Installation
To Next Page
Loading...
Need help?
General
