User's Manual
10
4.1 Picture
Background Information
You can set the brightness, contrast, sharpness, saturation, and more to get the ideal image. Press
Menu on the remote control, and then the
Picture
menu bar is displayed by default.
Figure 4-2 Picture
Table 4-2 Picture parameters description
Parameter Description
Brightness
Brightness of images. Brightness range is 0 to 100. The higher the value, the
brighter the image.
Contrast
Difference of the darkest and brightest parts of the image. Contrast range is 0
to 100. The higher the value, the darker the shadows and the brighter the
highlights.
Sharpness
Edge contrast. Sharpness range is 0 to 4. The higher the value, the larger the
contrast along or near the edges in the image.
Saturation
Color saturation of images. Saturation range is 0 to 100. The higher the value,
the deeper the color.
Aspect Ratio Display ratio of images. You can select
Full
(full screen),
16:9
,
5:4
, and
4:3
.
Color Effect
Overall effect of the image. You can select
Standard
,
Game
,
Movie
,
Photo
,
and
Vivid
.
3D Noise
Enable 3D noise reduction to reduce image noise and improve image quality.
You can select from
Off
,
Low
,
Middle
, and
High
.
Temperature
Color temperature of the image. You can select
User
(user defined),
9300
,
7500
,
6500
,
5800
, and
SRGB
.
You can adjust
R
,
G
, and
B
values in
User
mode.
The steps of setting the picture parameters are similar, and here uses adjusting
Brightness
as the