Operation 6
3 Operation
Notice 3.1
When the terminal is connected to the power source, you need to press to turn
it on.
Before an administrator is created, anyone can enter the main menu and do settings for
the terminal. For the sake of information security, you need to create administrators first
(Select 1 User > Add New User, and then select a user ID. Select User Level, press
OK/F4 and then ∧/F2 or ∨/F3 to select Administrator.).
When you need to connect the terminal to SmartPSS (the management platform), the
default ID is “admin” and the default password is also “admin”.
Settings about shifts, schedules, and departments in the terminal are independent of those
on SmartPSS.
For standalone system framework, see Figure 3-1.
System framework Figure 3-1
Main Menu 3.2
Standby mode
Before you enter the main page, the interface below is displayed. See Figure 3-2.
Standby interface Figure 3-2
To Next Page
Loading...
