Attendance Configuration on SmartPSS 30
Holiday (1) Figure 4-12
Click Add on the top left corner of the interface. Step 2
The Holiday interface is displayed. See Figure 4-13.
Holiday (2) Figure 4-13
Enter holiday name, select holiday time, enter holiday length, and then click OK. Step 3
A holiday is added. See Figure 4-14.
A holiday is created Figure 4-14
4.2.4 Attendance Event
There are seven default attendance events: Punch the Clock, Sign In, Go Out, Come back,
Sign Out, Overtime work sign out, and Overtime work sign in.
Select Attendance Setting > Attendance Event. Step 1
The Attendance Event interface is displayed. See Figure 4-15.
Attendance Event Figure 4-15
Click and you can edit attendance event names. See Figure 4-16. Step 2
To Next Page
Loading...
