Important Safeguards and Warnings II
Important Safeguards and Warnings
This Chapter describes the contents covering proper handling of the Time & Attendance
Terminal, hazard prevention, and prevention of property damage. Read these contents carefully
before using the Time & Attendance Terminal, comply with them when using, and keep it well
for future reference.
Operation Requirement
Do not place or install the Time & Attendance Terminal in a place exposed to sunlight or
near the heat source.
Keep the Time & Attendance Terminal away from dampness, dust or soot.
Keep the Time & Attendance Terminal installed horizontally on the stable place to prevent it
from falling.
Do not drop or splash liquid onto the Time & Attendance Terminal, and make sure there is
no object filled with liquid on the Time & Attendance Terminal to prevent liquid from flowing
into the Time & Attendance Terminal.
Install the Time & Attendance Terminal in a well-ventilated place, and do not block the
ventilation of the Time & Attendance Terminal.
Operate the Time & Attendance Terminal within the rated range of power input and output.
Do not dissemble the Time & Attendance Terminal.
Transport, use and store the Time & Attendance Terminal under the allowed humidity and
temperature conditions.
Electrical Safety
Improper battery use might result in fire, explosion, or inflammation.
When replacing battery, make sure the same model is used.
Use the recommended power cables in the region and conform to the rated power
specification.
Use the power adapter provided with the Time & Attendance Terminal; otherwise, it might
result in people injury and device damage.
The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)
standard, and supply power with rated voltage which conforms to Limited power Source
requirement according to IEC60950-1. Please note that the power supply requirement is
subject to the device label.
Connect the device (I-type structure) to the power socket with protective earthing.
The appliance coupler is a disconnection device. When using the coupler, keep the angle
for easy operation.
To Next Page
Loading...
Need help?
General
