Operation 10
7) Select a user level.
A new user is added.
Maximum user ID length is 8 digits (the user ID length range can be 1–
99999999).
Maximum user name length is 16 letters.
Passwords can be numbers of 1–8 digits (Zero alone cannot be set as password
and cannot be the first number of a password.).
At most three fingerprints can be recorded for one user.
3.4.1.2 Add in Batches
Add users by swiping cards
Select 1 User > Add Cards in Batch, swipe cards at the card reader, and then user ID, and
card number will be automatically saved. You need to edit user names, add fingerprints and
passwords separately. See Figure 3-7.
Swipe cards to add users Figure 3-7
Add users through USB
Excel charts with special format are stored in the USB flash drive. You need to export the excel
chart first, and then enter user information (including user ID, user name, password, card
number, department, user level and schedule mode) into the charts, and then import the charts
to the terminal. User information with the same User ID will be overwritten.
On the main menu, select 4 USB > Import User Info. Step 1
The prompt New info will cover the before one will be displayed.
Press Confirm-OK. Step 2
And then user information will be imported.
3.4.2 Query & Edit User
On the main menu, select 1 User > Query & Edit User. Step 1
Press OK/F4. Step 2
See Figure 3-8.
To Next Page
Loading...
