Operation 21
Fixed Mode
If you selected Forced in 5 Feature > Features > Att.Event Mode, you can select a fixed
attendance event, then users can sign in at one terminal and sign out at another terminal.
Open Door Keep Time (SEC)
The terminal can be connected to access control devices to unlock doors. The time range that
the doors will be open is 0–600 seconds.
3.8.4 System
Select 5 Feature > System, and then you can turn on/off tone switch and broadcast volume
switch, adjust volume, restore the terminal to the factory settings, restore the terminal to the
factory settings with user information and logs saved, reboot the terminal, do firmware update,
set device ID, and set screen sleep time (min). See Figure 3-21 and Figure 3-22.
System (1) Figure 3-21
System (2) Figure 3-22
Factory Restore: you can restore the terminal to the factory settings.
Restore (Save User Info & Logs): restore the terminal to the factory settings with user
information and logs saved.
When doing firmware update, you need to modify the file name to Update.bin.
The range of screen sleep time is 0–60min.
To Next Page
Loading...
