Dahua ASA1222G - Page 33

Attendance Configuration on SmartPSS 27
Timezone setting Figure 4-8
Table 4-1 Timezone setting description
Parameter
Description
Time Zone Name
Customize period name.
Type
Select work attendance type, including fix and free.
 Attendance type is set to fix attendance. For more info, please
see the rest of this chart.
 Attendance type is free attendance, and you only need to set
duration and whether to limit the latest sign in time.
Work Time
Set work time of this
period, meantime please
select day of week.
If this period of attendance time

zone has two separate sub
periods, then you shall click
to set second work time sign
in/out time.
If you set two work time, then

both time shall have sign in/out
to be valid for normal
attendance.
Record as X
Workday
One week time is recorded
as how many weekdays.
Start Sign In Time
Sign in only within set
period on attendance
device.
End Sign In Time
Start Sign Out Time
Sign out only within set
period on attendance
device.
End Sign Out Time
Late sign in within X
minutes is
permitted.
Define late, early leave and absence.
You can set different time ranges, the followings are example only.
Set start time of work time has standard sign in time. Actual time
later is than this time, within 5 min＜X≤30min，will be late.
Set start time of work time has standard sign in time. Actual time
later is than this time, X＞30min，will be absence.
Set end time of work time has standard sign out time. Actual sign
out is earlier than this time, and 0min＜X ≤5min， will be early
leave.
Late sign in over X
minutes is recorded
as absence.
Early leave within X
minutes is
permitted.