User’s Manual
56
The value ranges from 0 to 60. 0 indicates there is not standby time for the
Device.
Click
Monitor Channel(s) when logout
. You can select the channels that
you want to continue monitoring when you logged out.
Navigation Bar
Enable the navigation bar. When you click
on the live view screen, the
navigation bar is displayed.
Mouse Pointer
Speed
Adjust the speed of double-click by moving the slider.
The bigger the value is, the faster the double-clicking speed must be.
5.1.4.3 Configuring Date and Time Settings
You can configure the system time, choose the time zone, set the daylight saving time, and enable the
NTP server.
You can also configure date and time settings by selecting
Main Menu > SYSTEM > General > Date
&Time.
After you have configured the general settings, on the General page, click Next.
Date&Time
Configure the settings for date and time parameters.
System Time
In the
box, enter time for the system.
Click the time zone list, you can select a time zone for the system, and the
time in adjust automatically.
Do not change the system time randomly; otherwise the recorded video
cannot be searched. It is recommended to avoid the recoding period or stop
recording first before you change the system time.
Time Zone In the
list, select a time zone for the system.
Date Format In the
list, select a date format for the system.
To Next Page
Loading...