Dahua DHI-ASC1204C User Manual

SmartPSS Config 11
3 SmartPSS Config
Access controller is managed with Smart PSS client, so as to realize control and right
configuration of one door and door groups.
This chapter mainly introduces quick configuration. For specific operations, please refer to
User’s Manual of Smart PSS Client.
Smart PSS client offers different interfaces for different versions. Please refer to actual
interface.
Login Client
3.1
Install the matching Smart PSS client, and double click to run. Carry out initialization
configuration according to interface prompts and complete login.
Add Access Controller 3.2
Add access controller in Smart PSS; select “Auto Search” and “Add”.
3.2.1 Auto Search
Devices are required to be in the same network segment.
In “Devices” interface, click “Auto Search”, as shown in Figure 3-1. Step 1
The system displays “Auto Search” interface, as shown in Figure 3-2.
Figure 3-1

Dahua DHI-ASC1204C Specifications

General

Brand	Dahua
Model	DHI-ASC1204C
Category	Controller
Language	English