错误!使用“开始”选项卡将 Heading 1,l1,H1,Title1,Normal + Font: Helvetica,Bold,Space Before
12 pt,Not Bold,Heading One,h1,Head1,Head,1,Numbered,nu,Level 1 Head,1st level,Section He
ad,Sec1,h11,1st level1,h12,1st level2,h13,1st level3,h14,1st level4,h15,1st level5,h16,h17 14
Figure 2-11
Enter “Password”, “Confirm Pwd” and “Email”. Press [OK].
Press [Setting] for more than 6 seconds, enter the password set during initialization,
and click [OK].
Click [Network].
The system displays “Network” interface, as shown in Figure 2-12 or Figure 2-13.
IP addresses of VTH and VTO shall be in the same network segment. Otherwise, VTH
will fail to obtain VTO info after configuration.
Figure 2-12
Figure 2-13
LAN
To Next Page
Loading...
Need help?
General
