Dahua HDCVI - Page 148

138
Important
Add/cancel IP CAM function is for some 4/8/16-channel series product only.
 Add IP CAM: Click it; you can add corresponding X IP channels. Here X refers to the
product channel amount such as 4/8/16. System needs to restart to activate new
setup. See Figure 4-80.
Figure 4-80
For example, there is a 4-channel analog device, after the A/D switch, it can max supports
4 analog channels and 4 IP channels. Once it has become the 3+1 mode (3 analog
channels+1 IP channel), you click button, system becomes 3+5 mode
(3 analog channels+5 IP channel).
 Cancel IP CAM: Click it, you can cancel IP channel. System needs to restart to
restore original status.