Figure 5-24
5.8.1.4 Channel Name
Here you can set channel name. See Figure 5-25.
Please note this function is for analog channel only. The digital channel name here is
read-only.
Figure 5-25
5.8.1.5 Channel Type
It is to set channel type. Each channel supports analog camera（analog standard
definition/HDCVI） /network camera connection. Please note DVR needs to restart to
activate new setup. The network camera connection shall begin with the last channel. For
the 16-channel (or higher) series product, please go to the next page to set. See Figure
5-26.
To Next Page
Loading...
