Basic Operations 15
Input interface Figure 3-3
Select the kind of signal source that has been connected to the Display. For details, Step 3
see Table 3-3.
Preview of corresponding signal source are displayed on the signal preview window.
Tap the signal preview window, and then you can enter the signal source.
Table 3-3 Description of signal source
Connects to video signal source to play video images.
Connects to YPBPR to play YPBPR signal source images.
HDMI signal source can transmit uncompressed HD video and multichannel
audio data.
Connects to DP (DisplayPort) signal source to play DP signal source images.
OPS (Open Pluggable Specification) computer is an open, pluggable
microcomputer. After installing the OPS computer to the Display, you can switch
to Windows system, and then do operations such as using teaching software.
Connects to VGA signal source to play analog video images.
Wireless Projection 3.4
Through wireless projection, you can remotely operate the Display on your smartphone or PC,
or project the mutli-media content to the Display for presentation and other operations.
3.4.1 Projection through PC
You can project PC content to the Display for presentation and other operations.
To Next Page
Loading...
Need help?
General