System Settings 26
Advanced Figure 4-4
Table 4-3 Description of advanced parameters
Provides guidance on how to install print service.
Fixed channel: The Display connects to a fixed channel after it
starts.
Memory channel: The Display connects to the channel last time it
is connected to before it starts.
Input access.
Auto switch: Connects the Display to signal input source, and the
corresponding channel is automatically connected.
Show a pop-up window: Connects the Display to signal input
source, and a pop-up window appears prompting that whether to
connect to the corresponding channel.
Input name: Enter the signal input channel name, and after modifying
the name, the system-wide corresponding channel names are modified
synchronously.
Wake up automatically: Enable the function, and then the Display will
be automatically awakened from sleep status when connecting to HDMI
or VGA source.
After enabling HDCP (High-bandwidth Digital Content Protection), you need
to connect to device that supports HDCP protocol.
The HDCP function is disabled by default.
HDMI OUT: Sets HDMI output resolution, which includes 4K (default) and
1080P.
Enable USB, and lock USB port, then password is required when accessing
contents in the USB flash drive.
To Next Page
Loading...
Need help?
General