2 Menu Operation
2.1 Boot up and Shut down
2.1.1 Boot up
1) Connect the keyboard to the proper power supplying source. The power indicator light is on.
You can see the welcome interface (support customized setup) after the device properly
booted up.
2) Click 【ENTER】 or 【SETUP】 button to go to the following interface. See Figure 2-1.
Figure 2-1
3) Use joystick to control the up/down/left/right to Input user name and password, system goes
to the main menu.
Note
Factory default user names are: admin/default/guest. The password is: a1111111.
The default can not add/delete user, modify user rights or manage rights.
The guest can only operate control points. There are no other rights.
2.1.2 Shut Down
After you exit the system, unplug the power cable to turn off the device.
2.2 Main Menu List
The menu may vary due to different products. The following figure is based on the network
keyboard.
The main menu list is shown as below. See Figure 2-2.
To Next Page
Loading...
