Dahua NKB1000-E - Keyboard Control of Video Matrix Platforms; Video Matrix Splicing Control; Video Matrix TV Wall Output

25
7 Network Keyboard to Control Video Matrix Platform
7.1 Splicing Screen Control
Login the WEB of the video matrix platform (M60/M70), and then select splice control you can go
to the following interface. See Figure 7-1.
The network keyboard supports TV wall combination on the video matrix platform. You can add
the video wall you want to control as the splicing screen and then add the plan for each TV wall.
 Follow the steps listed below to add the plan.
1) Select 【Row|column】 and then click 【add】button.
2) Select the corresponding decoded slot and then click 【Save】.
 Follow the steps listed below to control the splicing screen.
1) Click 【Splice】
2) 【CTRL+Left click mouse】 to select several screens at the same time.
3) Click 【OK】 to splice several screens.
Click 【Cancel】, you can cancel the splicing operation.
 Each screen can set corresponding split mode such as 1|4|9|16.
 Click the 【Control ID】+【PLAY】, you can quickly select the output screen.
Figure 7-1
7.2 Output Video to the Wall
Login the Web of the video matrix platform (M60/M70).
 From 【Setting】->【Input Title】, you can edit the corresponding control SN of the local
input signal. See Figure 7-2.
 From 【Setting】->【Remote Device】, double click the signal source, you can edit the
control SN of the remote device. See Figure 7-3.