Dahua NKB1000-E - Network Keyboard Control of Decoders; Splicing Screen Control

21
5 Network Keyboard to Control Decoder
5.1 Splicing Screen Control
Login the Web of the decoder, you can see the following interface. See Figure 5-1.
Figure 5-1
Click the Splicing wall on the left pane; you can go to the following interface. See Figure 5-2.
Click Fast splicing button, you can realize 1×1 setup conveniently.
For the network keyboard, it support 2×2 and etc splicing setup. Please follow the steps listed
below.
1) Click Fast splicing button.
2) Select the screen and then click the Delete button; you can see the deleted screen becomes
grey.
3) Click Ctrl button to select screens you want to delete at the same time. And then click the
Splice button; it becomes 2×2 splicing screen.