Figure 2-15
2.3.4.1 Import
Insert the flash disk that contains the upgrade files to the keyboard and the go to the import
interface. Click 【ENTER】 to import the configuration files.
2.3.4.2 Export
Insert the flash disk to the keyboard and then go to the export interface. Click 【ENTER】 to
export the configuration files.
2.3.4.3 Clear Zones
Go to the clear zones interface and then click 【ENTER】 to clear all control points.
2.3.4.4 Default
Go to the default interface and then click 【ENTER】 to restore keyboard configuration to factory
default setup.
2.3.5 Version
It is for you to view current version information and etc. See Figure 2-16.
Figure 2-16
2.4 Zones
In this interface, you can quickly search a device via device ID, device name, COM address, IP
and etc. See Figure 2-17.
Figure 2-17
To Next Page
Loading...
