3.3.7.1 Set pattern
a) Select tour number and then input a value.
b) Select tour set button and then click 【ENTER】 button.
c) Use joystick to set pattern and then click 【ENTER】 to end. The speed dome can
memorize your whole operation.
3.3.7.2 Start pattern
Select pattern No. and then input a pattern number, select start and then click 【ENTER】
button, system begins pattern operation.
3.3.7.3 Stop pattern
Select pattern No. and then input a pattern number, select stop and then click 【ENTER】 button,
system stops pattern operation.
To Next Page
