1 here means there is 1 HDD.
For different series product, the max HDD amount may vary,
When HDD is working properly, system is shown as O. . “_” means there is
no HDD.
You can view the HDD amount the device connected to;
﹡ means the second HDD is current working HDD.
The corresponding HDD property.
HDD can work properly or not.
Display there is bad track or not.
Click it to view previous page.
Click it to view the next page.
Click it to view HDD record information (file start time and end time).
View HDD
type and
capability
Click it to view HDD property, status and etc,
4.13.3 Advanced
It is to set HDD group, and HDD group setup for main stream, sub stream and snapshot operation
Important
HDD group and quota mode can not be valid at the same time. System needs to restart once you
change the mode here.
The HDD group mode is shown as in Figure 4-126.
HDD: Here you can view the HDD amount the device can support.
Group: It lists the HDD Group number of current hard disk.
To Next Page
Loading...
Need help?
General
