IP/submask/gateway manually.
If you select the DHCP mode, you can view the
IP/submask/gateway from the DHCP.
If you switch from the DHCP mode to the static mode, you
need to reset the IP parameters.
Besides, IP/submask/gateway and DHCP are read-only
when the PPPoE dial is OK.
It is to display host Mac address.
It is to select IP version. IPV4 or IPV6.
You can access the IP address of these two versions.
Please use the keyboard to input the corresponding number to
modify the IP address and then set the corresponding subnet
mask and the default gateway.
Alternate DNS IP address.
For the IP address of IPv6 version, default gateway, preferred DNS and
alternate DNS, the input value shall be 128-digit. It shall not be left in blank.
System can process the downloaded data first if you enable this
function. The download speed is 1.5X or 2.0X of the normal
speed.
5.8.2.2 P2P
The P2P interface is shown as in Figure 5-28.
You can visit www.easy4ip.com to scan the QR code to login.
Figure 5-28
5.8.2.3 Connection
The connection interface is shown as in Figure 5-29.
To Next Page
Loading...
Need help?
General
